1 / 3
Cooling Fan for 3D Printer 50x50x15 24V
3.0 JOD
In Stock — 2 available
24 V DC 50 × 50 × 15 mm cooling fan for 3D printer hotends, part cooling and electronics enclosures.
This 50 × 50 × 15 mm fan runs from 24 V DC, matching the supply of most current 3D printer mainboards, and connects through a two-wire lead. It is used to cool hotend heatsinks, freshly printed parts, and the stepper drivers and power supply inside printer electronics enclosures. Check whether your shroud needs an axial fan or a radial blower, and confirm the connector, before fitting it. A 24 V fan on a 12 V printer will spin slowly or not start at all, so match the voltage to your board's fan output.
Specifications
- Voltage / Power
- 24 V DC, ~0.1 A (≈2.4 W)
- Part Type
- Cooling fan
- Interface / Output
- 2-wire lead (usually JST-XH 2.54 mm)
- Dimensions
- 50 × 50 × 15 mm
Add items to your cart to checkout
1